Make it Crafty Coloring Challenge #6

I love coloring, ever have since I was little. My husband being an artist means that I have a wide variety of media to play with; markers, paints, inks and all of my crafting goodies.  Armed with all of these at my disposal I still don't have a lot to color or practice with.  

I recently found, and I do not quite remember how, Make it Colourful coloring challenge from Make it Crafty.  Each month they have a new coloring challenge.  I found this to close to the end of the last challenge so I figured I would wait.  Well this months challenge was just that a BIG challenge. 

Browns.  Easy right...not so much.  They have two different challenges with in the theme, Easy and Hard. Easy challenge is to incorporate brown into your image. Hard challenge all brown, no other colors allowed.  Well I just could not resit that challenge, use nothing but brown on a picture.  I've never colored a picture before in monochrome. It was a lot harder than I thought it would be.

I set off to decide on my image.  Rule is that one image must be from Make it Crafty.  It took me forever to decide just what image from them to pick.  All of the images are wonderful and detailed. 
I ended up deciding on something that I could frame and put in my kids hang out room if it came out good once I colored it.  So the image I chose was their "Alice with Cards Digi Stamp".

 

And so I set out to color it.....

All done in brown watercolor and inks.

Here's what I used:

Derwent watercolor pencils - Bronze and Raw Umber.
Windsor Newton watercolor pan - Burnt Umber
Tim Holtz Distress Stains - Vintage Photo and Antique Linen (shading and background)
Pebeo Drawing Gum (used to mask off edges of image to color the background)

Let me know what you think.

 

Mini Pocket Page Book

I think I've mentioned before that over the Christmas season Prima Marketing ran a wonderful warehouse box sale.  I picked up a couple of them and discovered my love of their products, thick papers, cute embellishments, and lovely flowers. 

I used their Londonerry line of papers to make this cute mini pocket book:

There are 8 pockets in total.  Each pocket has a tag, frame, note card or other piece of paper to journal on.  Add pictures to these cute pages and pockets to customize it. 

Here's my list of what I used for this project....
The book is made form the Londonerry sheet of paper "Finick Finack" #843113
The cards, tags and insert pieces were from Londonerry Papers "Manor House" #843144 and "Bradshaw" #843151
The front embellishments are from a variety of sets.  The orange, yellow and black flower, along with the leaves and vine are from "Gracie Vine Doodle-Deux" #555825.  The blue rose with the gold tipped petals is "Coventry Rose Romantique" #553302.  The large brown flow is  form the "Brown Floral Embellishments" #713546.  In the middle of it all is the Finick Finack "Londondary Chipboard Sticker" #551230.

To help finish off the edges of the pockets, the seams of the pages and the spine of the book, I used a Nami Nami tape from Jet Pens.

Booklaces

What is a booklace?

Well simply it's a book necklace.  It is also far more than that......

These have started making an appearance in my stores and I wanted to share just exactly what they are.  They were designed to be a fun and fashionable way to always have paper with you to take notes, jot down lists or simply pass off a note or number to someone else.  They are all handmade and unique.

Lets start off by talking about the chains.  The chains are long to extra long in length.  The lengths of the chains vary but the average is 32"- 36" long.  I wanted something that if I'm heading out the door I can just slip on and not have to fuss with clasps and what not.  Some chains will still come with clasps but should not have to be used unless you want to. These should easily slip over your head and will come in a wide variety to match the books that come with them.  Each end of the chain will have a ring that simply slides on to the binder rings of the book to attach the book to the chain.

Moving on to the books.  The books measure 2" wide by 2.5" tall.  The start off with book board and a selected cover paper.  As with all my books a pH neutral PVA book binders glue is used. The covers of the book are punched and fitted with eyelets to help prevent any wear from the rings.  The book just grow from there based on my inspirations.  There will be some steampunk and tons of floral. I bought a ton of gorgeous Prima Marketing embellishments and flower so those will definitely be seen on books.  You'll just have to keep checking to see the new ones that appear.

The paper inside - To start the booklaces come with 50 plain white pages of 28 lb paper, heavier than you standard printer paper.  If you don't want the plain, 50 sheets of standard lined paper can be put in instead simply by making a note and letting me know at check out.  Other options might develop such as colored paper, which I have a ton of so just ask if you are looking for some, along the way. 

Pencils.  Well with every notebook a writing utensil is needed or how else would you write in it.  Instead of fumbling for a pen or pencil in your bag, purse or pocket the pencil is chained to the necklace.  No worries about forgetting it or losing it.  The pencils are attached to the chain via a swivel clasp.  The swivel allows for the pencil to be used with out the chain tangling up.  The clasp allows you to remove the pencil and place it on the dominate side of the chain or just take it off completely.  You might even prefer it attached to something else, maybe a key chain or zipper or something entirely different the option is yours.  These will also be available separately so if you need a replacement, mix and match or just want the pencil, they will be there.  ***NOTE: Because these pencils are hand wrapped with a matching paper then sealed the best way to sharpen them is with a knife or razor.***

The over all book itself....It's unique feature is that it is total replaceable, interchangeable and customizable.  Simply open the binder rings and a whole other world awaits.  The chains are the first to come off, simply slide the rings of the chains off and slide another one on.  Next take a cover off or both covers off. You need to take one off to replace the paper but if you want you can mix and match your covers. One the cover is off switch out the old paper for the new, replace the cover, the chain and close the binder rings. All parts are replaceable and interchangeable so have fun and be sure to check out ArtFire or Etsy for your booklaces.

Lots of New This New Year!!

 

First; I'd like to thank everyone who supported Crafty Day Dreams, your support means so much to me!

Second; I want to wish everyone a very happy and healthy new year. I decided not to partake in the New Year's resolutions this year for a few reasons, the biggest one being that I normal do not succeed very well at them. I have decided to take on some goals for myself instead. One of these goals is to try to blog more and show maybe more in progress stuff. I'd like to maybe do some videos too. Second goal is to get everything that I have made photographed and listed in my stores. Surprisingly I have a ton of items made that I just have not found the time to photograph and list.


Third; Be on the look out for some great new items coming your way this new year. There will be a wide variety of new items appearing in my stores.  Booklaces will be making a appearance after a some good feedback from the lucky person to receive the prototype.  Adjustments have been made and the original improved upon. Start looking for these in the up and coming weeks.  Be sure to keep checking back to see what's been added to the store. :)

Christmas Ornament Wreath

I saw this pin on Pinterst:

I had to go and see what this pin was all about. From the Eddie Ross website I learned that all I needed were some ornaments, ribbon, a wire coat hanger and glue.  I figured that one would look nice on the door for Christmas.  Last year I stocked up on all different kinds of ornaments just after Christmas when they were on clearance.  I decided to use a mix of both glass and plastic.

I started off by gluing all the tops on the ornaments and making sure they were secure.  I found a good little trick to keep the ornaments from rolling around on the table.  I took a roll of scotch tape, laid it on it's side and set the ornament in the hole.

I managed to keep track of the ornaments that I glued by sticking them back in the box but with the tops facing upward.  Here I missed two. 

What I failed to realize is just how many ornaments it would take to fill one coat hanger.  I had to use close to a to a eighty ornaments in a variety of sizes and shapes.  You just place them on the coat hanger one after the other and move them around until it is full but you can get the two ends together.

This is where I ran into some problems.  The coat hanger wire is really tough to bend so I ended up just twisting them together a couple of times and then using some wire to wrap and twist around
the two ends to hold them together.

I then found a good video on YouTube on how to make a bow using wire edge ribbon.

I made my bow and hanger using 2 1/2" wide ribbon and 25' in length.  I attached the ribbon to the wreath using some more wire.  This helps to hid the hook part from the coat hanger. (At this point the ornaments are on there really tight and I popped a glass one off.  It hit the floor and shattered. Probably would have been better to stick with plastic.)   I kept enough ribbon to loop around the wreath behind the bow and knot, to hang it from.  I  used a Command hook upside down on the inside of the door, draped the ribbon over the top of the door and hooked the ribbon on the hook.  I have to say I'm pleased with the result.

I just hope the kids don't slam the door and knock it off. Also hope that the Command hook holds.
We'll just have to wait and see.